Intellinet-network-solutions PRO SERIES INT-PSNC-UM-1106-06 Uživatelský manuál stáhnout pdf (Strana 44)

- 44 -

Image Capture Option

This is to configure image capture options when an event is triggered. When an event occurs,

you can get the pre-event and post-event images by setting "Before event" and "After event."

Before event

You may set the starting time to capture an image before the event is triggered. (Input limitation

is from 0 to 30 seconds.)

After event

You may set the finishing time to capture an image after the event is triggered. (Input limitation

is from 0 to 30 seconds.)

Image capture frame rate

Set from 1 to 15 fps when an image is being captured.

Image file name

You may designate the image file name to send e-mail or FPT after an image is captured. All

captured images are saved as .avi files (for example: Filename.avi).

Image file type

You can choose between two options. AVI means that the camera transmits a video file. JPG

means that the camera transmits a series of single JPEG images.

Append to the image file name

You may add information to the image file name.

- Camera IP address (example: filename_192.168.1.19.avi).

- Date and time (example: filename_20020218150030.avi).

- Trigger condition flag: When selecting "Activation of digital input port," "D" may be added to the

image file name (example: filename_D.avi); when selecting "Periodically every…," "P" is added

to image file name (example: filename_P.avi).

- Image sequence number: With this option, you may classify a file with the same name with

consecutive numbers from 000 to 999 (example: When you designate file name as "camera"

and select "Image sequence number," the file name appears as camera001.avi,"

"camera002.avi" and so on through "camera999.avi").

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 127 128

Žádné komentáře

Intellinet-network-solutions PRO SERIES INT-PSNC-UM-1106-06 Uživatelský manuál Strana 44